Connect Encoder to Central Control Panel - Part 1 (Android Phone owners)

Installing PortDroid

  1. Open the Google Play store on your Android device.
  2. Search for portdroid.
  3. Locate and tap the entry by Stealthcopter.
  4. Tap Install.
  5. Read the permissions listing carefully.
  6. If the permissions listing is acceptable, tap Accept.
  7. Allow the installation to complete.

Running a scan

Power off your encoder.

When you open PortDroid, Swipe right from the left edge of the screen and then tap Local Network (Figure A).

https://www.streamprolive.com/portal/images/portdroid.jpg

After tap on local network you will see a screen like the next:

Now: Power on your encoder(must be connected to same router as your phone). Connect to router using RJ45 cable.

Click the circle arrows in PortDroid to rescan. A new entry will show, that is the ip of your encoder.

On your browser enter: http://<ip of your encoder>/ a page like the next will be shown. user: admin and password: admin

This is the Local Encoder Control. NOT THE REMOTE CONTROL. Click HERE to go to the second part of this tutorial.

  • encoder, streaming, device
  • 0 gebruikers vonden dit artikel nuttig
Was dit antwoord nuttig?

Gerelateerde artikelen

Connect Encoder to Central Control Panel - Part 1 (IPhone owners)

Install Network Analyzer from App Store  Running a scan Power off your encoder. Click Scan LAN...

Connect Encoder to Central Control Panel - Part 2 (Order Central Control Panel)

With Local Encoder Control loaded in your preferred browser: Serial Number is the one at top...